Glass etching

src: www.personalizedwithpizazz.com

Glass etching comprises the techniques of creating art on the surface of glass by applying acidic, caustic, or abrasive substances. Traditionally this is done after the glass is blown or cast, although mold-etching has replaced some forms of surface etching. The removal of minute amounts of glass causes the characteristic rough surface and translucent quality of frosted glass.

Video Glass etching

Techniques

Various techniques are used to achieve an etched surface in glass, whether for artistic effect, or simply to create a translucent surface.

Acid etching is done using hexafluorosilicic acid (H₂SiF₆) which, when anhydrous, is colourless. The acid is prepared by dissolving silica in a mixture of hydroelectric acid (hydrochloric acid), quartz powder, calcium fluoride, and concentrated sulfuric acid derived after heating.

Glass etching cream is used by hobbyists as it is generally easier to use than acid. Available from art supply stores, it consists of fluoride compounds, such as hydrogen fluoride and sodium fluoride (which are still very dangerous). As the types of acids used in this process are extremely hazardous, abrasive methods have gained popularity.

Abrasive blasting ("sandblasting") is another common technique for creating patterns in glassware, creating a "frosted" look to the glass. It is often used commercially. High pressure air mixed with an abrasive material cuts away at the glass surface to create the desired effect. The longer the stream of air and abrasive material are focused in one spot, the deeper the cut.

Leptat glass is glass that has been etched using a patented acid process. Leptat takes its name from the Czech word meaning "to etch", because the technique was inspired by a Bohemian, Czech Republic (former Czechoslovakian) glass exhibit viewed at a past World's Fair in Osaka, Japan, and patented in the United States by Bernard E. Gruenke, Jr. of the Conrad Schmitt Studios. Abstract, figural, contemporary, and traditional designs have been executed in Leptat glass. A secondary design or pattern is sometimes etched more lightly into the negative areas, for further interest. Gold leaf or colored enamels also can be inlaid to highlight the designs. The Leptat technique allows the glass to reflect light from many surfaces, like a jewel-cut gem.

Mold etching In the 1920s a mold-etch process was invented, in which art was etched directly into the mold, so that each cast piece emerged from the mold with the texture already on the surface of the glass. This reduced manufacturing costs and, combined with a wider use of colored glass, led to cheap glassware in the 1930s, which later became known as Depression glass.

Frost etching is the process in which vinyl window material is cut to produce a pattern and then applied to a window to give a frosted patterned effect.

Maps Glass etching

Examples

src: 1.bp.blogspot.com

See also

• Glass engraving
• Satin glass
• Sea glass

src: i.ytimg.com

References

src: upload.wikimedia.org

External links

• Sandcarver Intro to Sandblasting
• Glass etching in Dubai

Source of article : Wikipedia